Separate names with a comma.
Wire wool should scrub it off but you might end up with a shinier bit and end up having to do the whole lot :D
My son is selling his 2008 1098 because he wants to change to something newer. The bike is in immaculate condition apart from the usual stone...
I don't have that bike now but they were the OEM plates with an open cover.
I discovered the results of a loose battery terminal this weekend. I was at Scottish Ducati Club event at Fort William and the bike ran with no...
There is NO pressure sensor. See post #41 above.
All the auto-electrical standard numbers are listed here - DIN 72552 - Wikipedia, the free encyclopedia
You can't easily test a condenser. If you connect a meter reading resistance to the condenser it should read a value which will increase as the as...
Ah. I see it now, different diagram but same idea. 15 is the standard number for the +ve ignition feed, I'd connect that one to the magneto and...
I think I've found your diagram online. And yes, one side of the coil is connected to ground and the other to the magneto coil. Although not...
If you posted the wiring diagram it would help! Coils usually have one terminal marked "+" and the other "-". If it's a negative earth bike the +...
The pump runs all the time the engine is turning, whether it is firing or not. It runs for 2 or 3 secs at switch on then the ECU closes the relay...
If you are only running off a 1/2 litre or so don't bother warming the oil. It will be easier to get the sump plug back in again if the oil is...
Thanks I'll give them a try.
Following a chain breakage, a friend needs an alternator side cover for his 748. It is a 2003 model. Covers from an ST4/ST4s, MS4/MS4R and 996...
I think you should get a wiring diagram. The fuel pump/relay power doesn't go anywhere near the dash, nor the tail light.
And you need 2 of them, one for each cylinder.
It has been known for the wiring in the fuel pump flange to break down where they go through the gland.
It is a sealed unit, but they pry apart quite easily and stick back together very well with polystyrene cement
If you think the Deltic is weird how about this? [IMG] A 3 cylinder 2-stroke with 3 crankshafts and no cylinder heads! More here: Michel Opposed...
As far as I know it just vents into the top of the tank. You should be able to see it with a mirror in the filler cap. If you take the filler...
