Separate names with a comma.
I have similar from QB carbon. They are larger than the standard and I cut out the openings in the fairings a little to suit. I did originally...
When I've tried that I usually end up dropping the clip into the engine whilst attempting to fit it, that or it 'pings' across the room. Plus...
Likewise, a real wheelie machine but the handlebars used to 'swivel' in the clamp and I broke one of the frame rails (the 'swingarm' tube) through...
I have a pdf of Ducati workshop manual for 1999, 996. At 20mb it's probably too large to email but I can upload it for you to download if you're...
I use a length of 0.4mm shim steel and a large jubilee clip. With a little oil, tighten it up to get the rings in the grooves and then back it off...
Agreed, for what it's worth on standard bolts (especially stainless) I normally use copper grease and on hi-load stuff like these pinchbolts, rear...
5 Minutes to get this on just using my hands; [IMG] 5 minutes later; [IMG] I wish the Guzzi tyres had been so easy; without a doubt the worst,...
I've had to go out to look at it as I've never removed the bracket but there are 4 fixing bolts; the 2 posts that the light unit pushes onto are...
[img]
I had the fuse holder (the larger of the 2 underseat) melt, it was actually still working but the whole thing including the fuse was a glob of...
To add, I used to get tyres supplied/fitted by a tyre specialist/bike shop until cheap tyres on the 'net became available, then I would use a...
Many of those are too small to fit a 17" wheel properly. I tried 2 different models and the support rings were a smaller diameter than the rim so...
Friend of mine bought an early 916SP, official import from a UK dealer and it had Kmh speedo. I think Ducati just used what stock they had/could...
Now sold, thanks.
You have a PM. :upyeah:
Just to say these are very high quality piece and brand new, never fitted. Any interest at £50?
OK, not going far with this. Any interest at £20?
My M900 is a bit of a mix of years so things may not be as you might think. That said mine has the early 17mm spindle and these adjusters are for...
You would think they might, however I know that on the Showa forks they are not interchangeable - the 999 models have larger adjusters and...
