Separate names with a comma.
The error code doesn't look to be in the same format as the Ducati codes, but a 1.2 is a short to earth of the TPS. Might be worth a look at the...
The starter is on "servo start" where the ECU keeps turning her over for a set time until it starts. If it's still going after 10 seconds or so...
Could you try mounting the IMU inside the bracket, rather than underneath? The IMU is very sensitive to position and to the angle it's mounted....
Motul 7100 15W/50. Whichever brand you go for, 15W/50 grade is important to the correct operation of the DVT.
A new set is £2500!! so I guess in the scheme of things it's not bad. Only a good price if you need them I guess ;)
They should swap ok. There are differences, like gear ratios etc. but the basic shafts for gearbox are the same. Bearings are the same. 999...
$29 is a bit pricey... they're £8.50 from Ducati... ;)
It's listed on this thread fella... £93.80 https://www.ducatiforum.co.uk/threads/ducati-performance-848-1098-1198-30-off.54839/
I've got a brand new DP kit going spare if it's any use
The 600 is carb'd so no ECU. If it is restricted for say A2 then the restrictors are either in, or under the inlet manifolds.
Almost ;) had to check if it was 12 or 12.2....
12.2 x 18 x 1.5mm ;)
Number 20 is also prone to breaking. Both have been superseded in recent times. If you're going to the trouble of doing one, it's worth replacing...
Prevents the ECU getting spiked by 12v back feeding from the solenoid contacts. Seen a couple of badly fitted alarms over the years bypass the...
I've seen the metal QR fittings for the 996 type of fuel connectors, think they are available from triumph?? The 1098 is different and I'm not...
Ducati Performance track bodywork parts for 1199. Racing tail unit (no lights) finished in white. RRP £119.90 £100 inc. delivery (also fits 899)...
It was done to improve the reliability of the sensor. Theory was that it being screwed into the engine casing was causing premature failure...
There's a fine film on the back of it that "tacks" to the swingarm. The rest is held in place with fasteners supplied. The rigidity of the carbon...
Hi Adam. These are pictures of the swingarm and genny' cover. All fittings are present and they are brand new. [ATTACH] [ATTACH]
Dunno TBH. Bike sales isn't my thing. The market seems to be strong for good clean bikes though. There's a lot of tat out there which I guess...
