Separate names with a comma.
I've just replaced the basket and friction plates on mine and the wear on yours is nowhere near as bad it was on mine. Clean it out and check the...
My bike is from "way back when" - it's a 2000! But I do recall re-using the bolts when I did the clutch on my '92 900 and that didn't end in tears.
I read it on another Duc forum, so it must be true ;-) Also, there's a big scary Caution comment about replacing them in the workshop manual....
996. I understand that the oem ones are torque-to-yield bolts and therefore shouldn't be re-used. Any problem with using standard high tensile...
I guess you would see a bit of a drop. I don't know how much water it would take to make that much mayo. It was just a thought - I happened to be...
Water pump shaft seal gone, possibly. Don't run your engine on mayo.
[ATTACH] Those belts look like they're running too close together. As it's your first Duc I'm wondering if you rotated the tensioner in the right...
Well it is Christmas. Milk of magnesia should help with the creeper stool.
I'm sure the late Mussolini would thank you. Did you speak on behalf of the late Hitler during the VW emissions scandal? I also had a GTV and now...
Old post, I know, but...that had nothing to do with a "rogue " battery. That was simply the contacts of your starter relay sticking. Possibly...
First photo is clearly a lazyarse black cat lounging on a white sofa holding a can of lager. Or maybe a very small olympic torch. I'm not getting...
Ok, no problem Nasher. Looks like it'll be about £5-6 for no-frills 1st/2nd class postage. £10 all in? Send me a message with your address. Pete
I have one but it is has a couple of cracks and holes so it might be too tatty for you. [ATTACH] [ATTACH] [ATTACH]
[ATTACH]
Like this [ATTACH]
That looks identical to the Renthal carrier, in which case there should be a big washer under the circlip, otherwise there will/might be enough...
Cheers Denzil. I'm not hugely worried as it did drop down when hot and never got much above the 87psi limit at higher revs. I might check out the...
Recently I replaced the oil pressure switch on my 996 as it was leaking and the light had started to flicker at idle when the engine was hot. I...
Cheap fix that's worked for me on 2 bikes: Drain, remove and clean the bore with superfine wet and dry. Then fit a quad (X) ring seal from...
You are married to an awesome woman, and no mistake. You lucky man.
