Separate names with a comma.
Yes - up and down, up needs revs to be smoother and not so good in lower gears. Downshift is good in all gears, only 900m so far. I expect it to...
Search for 3M H8671 Tape - AKA helicopter tape
Once a chain and the sprockets get towards their end of life they will start to wear rapidly, bit like falling off a cliff. Once the OEM chain...
The condition of the front Sprocket is a good indicator of chain wear on a Mutley! Take off the black cover over the front sprocket and look for...
3M HS 8671 Helicopter Tape is the answer BUT you have to put it on from new or as soon as you see any initial marks left by boots etc. And it is...
My 2015 DVT didn't have self cancelling Indicators (or if it did they didn't work!). My new 1260 has got them and they are very clever, no set...
Pick up my 1260 tomorrow and so far all parts / extras from the DVT 2015/17 range fit the 1260, Rad guards, screens, Riding lights, even the...
this is a useful Video - applies to 2015 - 2017 DVT Mutleys [MEDIA] Only problem is that you have to watch it backwards as this is the assembly of...
I have and he agrees :)
I use wire from a wire coat hanger, had to grind down the end a bit and straighten it out. Needs to be at least 30cm long and then you can push...
I put a CNC racing 28mm slave on mine and it makes the operation much smoother, the OE unit was lumpy but the clutch has never slipped in the last...
My headlight unit is adjusted as far down as it will go and is still sometimes a bit high when following a car at night. Two options - 1 - Switch...
I fitted a CNC 28mm to my DVT, it is a bit lighter but so much smoother in operation than the OEM Slave cylinder so it was a worthwhile change. I...
I am told the seats are new / different and that the 2015+ seats will not fit so will have to get a new Comfort seat for the 2018 bikes, Not sure...
Top Box should fit the new 2018 model the pillion hand grips are reshaped as per the endure but the mounting looks the same. Panniers are also the...
Speaking from experience - a worn chain on a worn sprocket will also snap! :(
Check and clean both LH and RH bar switches, the mode switch can stick down or not make a good connection and that could have confused the system.
You only need to set the chain tension once!!!! Do it the one time as per the book then straight away put the bike on the side/paddock stand in...
Had the same happen on my DVT and it is not necessarily a dealer issue but can be down to bedding in the seal and screw on a new oil filter. I...
You could always get the seat re-foamed to suit, theses two companies are good and maybe more local to you -...
