Separate names with a comma.
848 runs coil sticks, directly on to the plug. Not aware of any upgrades as they're pretty good at what they do. No losses thru leads etc. They're...
Service schedule is 12 months or 9000 miles from the last service.
FE is right. Bendix number plus 500, there is a slight change to the prefix letters but you can confirm with bike torque racing who are the...
Yes mate. As far as I know, Bendix own SBS, always have done and they’ve consolidated the brand. SBS was always better known for bike brakes. Same...
Be worth fitting a new injection relay as well
Yeah, tank and subframe off to do the rear headers. You’ll need the radiators out of the way to get the fronts out as well. It’s a big job....
Still available. The original 916 part number is obsolete, but the one in the link is the later 998 one. They’re about a quid from your dealer
The pin is for the centre stand spring. If yours is a sport and didn’t come with the stand, it won’t be there. If you need one to fit the stand,...
Motul 7100 or 300v. 15/50 is the right grade 300v has the edge on performance but is a little more expensive. Either will suit road use, but for...
Yes. There’s a clip fits into the bar and the switch gear slides over and locks in it. You depress the clip with the tool and the switch slides...
Yes, iirc it’s the underside from the center of the bars outwards. Take your time to feel the retainer compress. It’s possible the blade can go...
The switchgear has that much packed into it now that it's not designed to be split, hence the concealed clip fitting that secures it. The tool is...
Wet climate? Are you referring to the wet boiling point? There’s two figures quoted for the fluids. The dry is for brand new fluid. The fluids...
Factory tool is a little under 50 quid and yes, if you want one you can order them. I wouldn’t use anything other than aluminium tbh. Mild steel,...
The factory tool is aluminium. A steel drift flares the end of the axle and as it's a tolerance fit in the bearings and once flared, it ain't...
The reservoir will have no effect on the braking efficiency. Talk to you dealer about your rear brake issue. There has been a technical bulletin...
It's a casting line, where the cores have been removed. The motor I have here is the same. The line runs down thru the inlet tract.
Looks quite normal to what I’ve e seen tbh. Just built a 1098 motor with similar build up. No issues with valve sealing or stem seals. Could be...
They do it for checking MOT & tax details to. Just double check it’s a .gov site you’re logging into.
Monster 797 for sale. This has been our courtesy bike and has covered just 1749 miles. '19 plate with Ducati warranty until March 2021. Great...
