Separate names with a comma.
From Ducati, there are 2 leads at £27 each and 2 at £31 each. About £116 for the lot.
Fair enough. I have found that lining up so that the selector fork is centred over the 2 pins of the selector drum with the gear box in 2nd has...
I've read that thread before, and I think the pictures have been on this forum, it says that the damage was caused by incorrect belt tension Have...
I scribe lines on the inner case marking the position of the gear change plate before removing it so that I can realign it when I put it back...
Yes, and the belts are 2 teeth shorter to compensate. The pulleys are the same.
Good too hear that you've got too the root of the problem. It looks looks that bike has been more than a little neglected in its past. At least...
Like I said, avoid involving the DVLA
Groan
You've got a high resistance between the battery and the red/yellow wire that's why you are only seeing 8V. When you turn the key to ON the...
Back in 2002 or maybe 2003, my then 1995 900SS developed a cracked frame, as many of the carbed models did. I took this up with Ducati who after a...
Yes, to cut the engine. The bikes weren't fitted with alarms at the factory, as you said they were a dealer fit.
I'd forgotten about that connector and it’s not on all 748/916/996 variants. It is actually provided for connection of a tilt switch as required...
I remove these alarms quite often. The datatool breaks 2 circuits, the starter circuit and the fuel/pump circuit which also disables the sparks...
That's why I moved to cornelius kegs.
As long as you properly sterilise them paying particular attention to the rubber washer they work fine. If they are beer bottles they are usually...
Ferment in a bin then transfer it to a 5 gallon plastic container with an airlock. The beer will stay in there to condition and for the yeast to...
The order of the plates won't make any change to the stack height which seems to be marginally too high with the new plates, although it might...
fml??
I reckon it's big enough so that the screw doesn't bottom out and damage the terminal if it is screwed down with no connector fitted, then of...
Awsome!
