Separate names with a comma.
I had an Audi A3, 3.2 (VR6 engine) on which the chain tensioner failed at 40 odd thousand miles. It was just out of warranty but after much...
I acquired an ST2 engine some years back. I did so for the cams which I used on my Monster and then sold on most of it to recoup the costs (turns...
Indeed, the valves can't go out of spec due to wear if not used. I change the belts every 2 or 3 years and check the valves whilst in there and...
Example of the marking on M900 cams; [IMG] Though it maybe in an awkward spot - like behind the pulley...
Yes there is (should be) a code stamped somewhere on the camshaft, should include O (horizontal), V (vertical), A (intake) and S (exhaust)...
This, my Brembo HPK discs got very sloppy, I thought that it was the bobbins but when I inspected it was the centres that had worn although I did...
I fitted risers to my 916. They're not a lot higher, maybe an inch? (can't go much more or you hit the fairing) and they also have adjustable...
Indeed, complete with mechanical speedo drive which 848 etc. won't have.
Likewise on my 916; [IMG] No, modding required as they are 916/996/998/748 specific. If you use 848 wheels, rear maybe fine but you'll have to...
I've got one on my 916, think it was from 'MPL' in Germany - basically an ally version of the original, spins up nicely and no extra tendency to...
When I first fitted the Termis to my bike and replaced the chip with the Ducati supplied part, it ran the pump continuously and wouldn't start. I...
I've got 50mm Termis, I can't say it really sounds any louder than with the 45mm Termis that I originally had. The box they came in has '102db'...
Sounds good. I think my eyesight was playing up when I changed mine... :bucktooth:
Is the oil seal at the clutch end of the shaft (where the pushrod sticks out) fitted the right-way round? Because if it is fitted backwards then...
Head lower at exhaust side to make engine shorter to give more front wheel clearance as can get very close under braking on some models.
Unless you want to check and, if necessary adjust the timing then it's not a good idea. As it happens, I do have some brickwork needs doing...
Agreed. And a much clearer explanation than mine too...
Yes once set it won't vary but because the extra belt length is taken up on 2 sides there is the variable if you alter the amount on the fixed...
