Separate names with a comma.
Back in the 1980's I was working in Bogota, Colombia. Been out one night with a customer, he drove an old '50s American car which regularly...
I had this problem with my Monster engine when I first got it. No way would the filter come out and a screwdriver through the side just ripped it....
Indeed, where did they drop it? In the river perhaps...
Probably the best option. When I was building mine, base gaskets (shims) of anything other than 1mm or (IIRC) 0.4mm were not so easy to source...
They are very substantial, maybe thicker than strictly required but certainly shouldn't fail. On the other hand, I doubt there's enough material...
Indeed and, IME JE 94mm (944cc) 'Ducati specific' pistons are (or were) supplied with chrome rings. Non-chrome rings can easily can be sourced...
Slightly O/T and not wanting to panic you but do you know what Piston rings were fitted to the JE pistons? Asking because the supplied rings on...
I have a braided line with banjo fittings, much like a brake line with a 'T' that splits to the two heads once it's crossed through the 'V' of the...
The bearings are closed on the inside so that the oil flows down the cam, there's plenty of oil in the bearing anyway and the oil passing through...
The oil gets to the rockers through the camshaft so the route is the same but running directly to the cams gets it there direct from the oil pump,...
Indeed, MBP make (or made?) bearing caps with oil feeds. Take the feed from the oil pressure sensor pickup and block the feed from cylinder to...
When I had my 916 gasflowed, on initial startup after rebuilding the engine it ran like shit - spitting back through the intakes etc. due to...
Mine came with cap head screws from new, thought they all did...
Likewise and never needed it either.
IMO mostly OK, I aim for 0.10 - 0.12 openers and 0.05 closers (definitely less than 0.10 and as tight as possible with no drag for the closers)...
Plus you will have done 90% of the job anyway so just fit new bearings.
Likewise, I think it was made of chocolate - use a proper tool or make one from old plates.
This is for a Translogic dash speed reading (with gear indicator) but would work for a gear indicator such as GIpro that can be bought with a...
Like this?...
I've used a guy in Leicester to do leather alterations, did a great job for me, don't think he has a website and not sure if he's still doing it...
