Separate names with a comma.
You would be best to connect the battery earth to the engine rather than the frame so that there is a path of least resistance to the starter. The...
Try swapping the plugs leads front to back. You say it's got sparks and by very nature of the pickup arrangement it's not possible to get the...
That's the correct location for the battery terminals. Looks like someone has removed the fabric tape from the ECU connectors. I'd cover these,...
Check the connector to the BBS unit under the seat. It connects various units; indicators, fuel gauge, stop light and fans to the rest of the bike...
The parts diagram shows a 'special screw' (item 12) which another screw (17) screws into securing the 'fairlead' (24) with a washer (15). The...
A picture might help identify it.
Check my post #3 on the 1st page
Nyloc are no good. The nylon inserts will melt. If you want to use a self locking nut use an all metal sort like Aerotite
For Android look on Google Play for Gates Carbon Drive. Works a treat.
To get the cams out of the ST2 you will need to remove the cam pulley which needs special tools to remove the nut and hold the cam wheel and the...
The studs are screwed into the cylinder head, M8 if I remember. The nuts have a very small hex at 10mm so they round off very easily when they get...
For these sort of jobs I use a junior hacksaw, or sometimes if access is it gives better access a dremel with a cut-off disc. Cut a slot in the...
It is all to do with homologation. Whether it the beam pattern is satisfactory or not has nothing to do with it :(
Yes, not true at all. The bike in question had just been rebuilt so it's not surprising that it took some time for the oil to reach the rockers....
No, I found it when checking the valve clearances. I'd removed the cams to check the rocker surfaces. Flaking rockers are not common on the 2v...
That's a guaranteed certainty.
I'm sure they are but by the time he's bought the whole set it will be quite expensive for a one off job. And there is also the difficulty of...
And these are only the numbers. What about ZDM, S and *
Nearly 20 years ago I had a 900SS that suffered from the common cracked frame. After a lot of correspondence with Ducati UK they agreed to replace...
There is nothing available for the Supersport but if you have plenty of cash you can buy a USB drive from Ducati covering all the models from...
