Separate names with a comma.
I used to drive up the A303 every week back when i had my Rd 250.. 89/91 and it was a nice landmark to wizz by as part of the journey etc....
My old 996 Bip had a similar issue and Ducati changed the frame as good will and I paid for the man hours to do the change. (Germany based)
to be honest if I was moving on from the V twin Panigale to the V4 I would be looking at possibly getting a longer exhaust made up to get the dB...
I ran my 1299 and a 996s for a while, and the 1299 was of cause light years ahead in regards of performance and ergonomics etc. But there is still...
I had the same fault with a 748 a few months ago running fine, turn on lights and it cut out. it was the Yellow ignition relay next to the...
I have the Termi D170 underseat system on my 1199 now, and due to the similar noise issues, I had Phil Smith from SPF make me some extended cans...
give Phil Smith from SPF (Storm Performance Fabrications)a call, he offered to do my termi cans as they are also due a repack. you can find him...
check also the Yellow relay next to the battery, I had a 748 in to look at with a strange issue of cutting out when the lights were turned on, and...
still not sure what lack of Torque your mean, my 1299 has 135nm with 189ps at the back wheel, you should have a play with the DWC and DTC settings...
nice job, also don't forget Phil Smith from Storm performance fabrications ( SPF) as he has done a few exhaust repairs for me in Ti and the works...
what did you do to protect the original tank from the inside of the tank cover? as I have one of these in the garage but never got around to using...
be careful with these, as back in the day I sent 7 ( yes 7!) Ti end cans back to Ducati due to them tearing open from the upper mounting point....
GPS module seems to available https://www.kfm-motorraeder.de/cms/en/genuine-spare-parts/ducati-spare-parts?itemid=38510142C
I tested a s1000rr before I bought my 1299s, as I wanted to see what the difference was like, I found the BMW powerful but slightly boring (this...
check to make sure the DTC and Wheelie control aren't turned up, as it may cause the hesitation/ lack of get up and go in the lower revs
i had a 996s that threw an output bearing on the Gearbox.. i looked at parting out, new motor etc, but I decided to pull the motor and took it for...
I would clean it off with some brake cleaner. check, Oil pressure switch extension as they can crack, check the area around the Heat exchanger to...
other option is a Rapid bike Evo and then switch maps when you change the exhaust. map switching takes only a few minutes.. plus you will have the...
also consider the TWM levers, I have them on my bikes and i understand they are made by the same manufacturer as the DP version, but at a...
the Team posted some parts out to me in Germany without any hassle. :upyeah:
