Separate names with a comma.
Yes, when I put in a different gearbox and the shaft was longer
Or wiggle the sprocket, if the wheels not connected as per your pic
Does it shift when you wiggle the back tyre if its connected? Sometimes it just needs a little help as the gears can be a little 'sticky' when...
Can anyone confirm if that should have the stabilising rod on the back brake of that one? Mines an early over slung
Rob, PM sent
Looks factory!
Gaz, runa wire from the body of the rectifier to one of the screws ino the front subframe. The screw will earth it and there's no need to grind...
No, but I've seen it on the carby, which has a similar setup, not nearly as long as those though, would a triangular brace at the base of that arm...
That looks a lot nicer. And everyone knows that Sils are the best
No worries at all, don't mean to put a damperener on it, just to give you ammunition and knowledge prior to purchase. It's certainly not original...
Ok, I'm going to be critically constructive, it's got some nice bits on it (non standard) such as the SES rearsets, and nice BOS exhausts. Non...
I'd say between 2 and 3 grand. Nearer 2. I agree with what's been said. Horrible non standard frame colour. But at least it's not rusty! As a...
Yes, the lower I have only seen on a 91/92 bike. Mines a 93 and has the first one. The earlier one is a white frame and also has black Brembo...
Those captive nuts are only to hold the hugger, could use a bit JB Weld perhaps if you could get I'd down the edge? The alloy welding that you...
Compression test will definately indicate. They also have a raised crown and cutouts for valves.
Sorry, just seen this post. @Sev I have the gearbox from a 748 but to be honest the bike revs really quick and goes through the gearbox fast, so I...
PM sent
If they are anything like the SS ones Ive got, top quality and much lighter than stock. If only I had a triple 8.....
I had similar damage to an SS swingarm years ago when a sprocket nut came loose and carved a shallow channel in it. Got a local tig welder to sort it.
Have you posted this up on the Facebook groups? Wealth on knowledge on there too. Sorry to hear of your situation
