Separate names with a comma.
Can second SPR, very helpful when I was setting the Monster carbs/ignition.
As well as the relay, check the fuse associated to it. The fuse holder on my 916 melted along with the plastic of the fuse - the whole assembly...
Maybe but if you fit the appropriate hugger then it works either way. My M900 has a braced swingarm that I believe came from an 851/888? It had...
OK, I wasn't aware of that but what seemed odd was the location of the plate, like this; [IMG] Realise the above is US not Spain but, whilst we...
I used to have an apartment in Menorca (didn't have a bike over there though) and whilst I can't say I noticed too many loud bikes, the attitude...
Black wheels are definitely my favourite - need less cleaning and still look good (albeit from a distance) when covered in chainlube. A friend...
I've got Cyclecat adjustable bars on mine. They can give as much as around 2" of lift though I've only set them around an inch (any higher and you...
Nice, I made one from stainless steel and then later ended up swapping the original LHD version with someone who was going 'the other way'.
Sounds like the 916 rear brake - you'd have thought they'd have learned by now after nearly 30 years... : unamused:
A good description of leakdown test here;...
I'm not familiar with the DS engine (valve angle & plug location etc.) but on the 900 2v, you can see the valves through the plug hole**. You...
Leakdown test? Fill cylinder with compressed air and see how quickly/from where the air escapes (compared to the known, good cylinder). You'll be...
If the valve was even more than slightly bent, I would expect the cam to be stiff to turn or even not turn at all due to the valve not being able...
'Other' bike in action; [IMG]
As above a lever that fits directly onto the gearshifter shaft does the job nicely also can make the shift a little more positive as there's less...
I think the only adjustment is to bend the little fork-shaped end of the lever so that it activates more or less onto the plastic pivot that...
Agree on the freeplay. My bike had the freeplay 'adjusted' at the first service as the shap said there was too much, they obviously adjusted it...
I had one on my 916 for a while (though not sure if it was Ducati branded or aftermarket?), as far as I could see there was no real benefit for...
My Monster which is a bit of a 'bitsa' always had uneven sprocket/chain wear due to the front and rear sprockets not being quite in line (frame,...
Definitely worth fitting an alloy nut. I fitted one to my Monster as it was leaking and the plastic nut wouldn't tighten - it wasn't broken but...
