Separate names with a comma.
Following with interest. I think 11k for a biposto isn't realistic but perhaps I'm wrong. Good luck.
The regulators do fail, it's very common. The yellow cables, in particular the connector in the middle do corrode and cause problems too. Best...
I'm not the right man to give advice on this kind of bike. I have no idea what's good and what they're worth.
Can't help you with a bike but Hi back at you form Northampton.
Drill the head off. They are quite soft so a normal drill bit will make short work. Once the head is off the rest of the bolt usually comes out...
Fitted one today. Didn't really need it but I like the feel of it. [ATTACH] [ATTACH]
Generally you can adjust the position of the pedal but not the amount of travel. That is governed by the size of the master cylinder and the size...
That's probably about right if it includes all the consumable parts like seals, piston guide rings and oil. Check with them. Öhlins parts are...
https://www.ducatiforum.co.uk/posts/1903181/ Here is the showa damper link
I used to rebuild dampers for a living. The basic Öhlins is quite easy to do as far as dampers go but you do need a few special tools like a...
Take out the oil pressure switch and replace with a oil pressure gauge for the test.
Needs a new bottom. Dump the gas. Undo the broken part and replace. Fresh gas and jobs done. The question is, how did this crack in the first place.
They are handy little things and very reasonably priced. Very accurate as well. Mine shows the bike sitting on my drive which is about 5m from...
Use the gates carbon drive app for tensioning your belts. Ping longest run of belt. Aim for 110Hz. Check pulley bearings and replace if in doubt....
Wishful thinking. Those calipers are scrap.
I use a Vodafone curve. It's not specific to bikes, it's just a key fob you can put anywhere. Very inexpensive. The only downside is battery life...
https://cohpro.com/product/fuel-hose-in-tank-7-3mm-id/ You need some of this inside the tank. About 35cm. I use this and it fits nice and snug....
Soak them in vinegar for a day or two. Gets rid of the oxide and you may be able to make a better judgement.
5/16 i.e. 8mm
Number of ports is irrelevant. All you need is one USB port.
