Separate names with a comma.
Stand the internals upright, push down the spring and spacer and it will reveal the nut that needs to be held so you can unscrew the fork cap....
Can you actually see out of them though ?
Can anyone with knowledge of a very early production Monster 900 tell me why there are 3 spigots underneath the tank? It’s a ‘94 reg bike but...
Daytona do a repair service :upyeah:
Apart from the tail unit yourself you really don’t need anything else as you can reuse the fittings off the BP tail unit, just turn them round...
Just curious as to why you’ve added the clutch and alternator protectors when you have the crash bars fitted? Also, which make(s) are the clutch...
It was the thread in the crank. I took the risk of running a tap in, the first 1.5 turns met some resistance but then after that the tap ran in...
Most recently, a 2020 scrambler 800, a 2016 Hypermotard 939 and a 2019 Hyper 950. I did check the thread on the bolt on the tool and JIC ran a...
There’s a discussion on this very topic here https://www.advrider.com/f/threads/proper-grease-for-inside-master-links.1095651
I just wanted to check before trying to force it in, or even run a tap into the crankshaft thread, just in case it has changed. If it were just...
A question for those in the know. I have this crank turning tool [ATTACH] had and used it for years, but lately I’ve had a few bikes I’ve gone to...
You’re in France iirc, if you’re not aware (but you may be) 123bearing.eu carry all that you need in stock, at good prices, and ship quickly -...
This is on a 1998 ST2. As you can see the speedo displays both mph and Kmh but the odo is clearly marked on both the total and the trip counters...
The o-ring that seals the pump assembly into the tank ?
I can understand that happening with a fork cap but the preload adjusters shouldn’t be too difficult to turn so shouldn’t require much force....
One more vote for a single layer of electrical tape :upyeah: - 2 or more layers if you have sloppy spanners.
I did the DRE, 2 day off-road skills course in Italy earlier this year. I have to say, Ducati do it really really well and it’s a fantastic...
Thanks Ian, I stand corrected, obviously I had that bit of info arse about face, SC make it for Vulturebike :upyeah:
Just ignore him until you get a letter from a solicitor, then ignore him further but speak to a solicitor yourself. He would have to sue you for...
After a day of asking around and much feedback I now know Ilmberger make the Ducati DP stuff. However, Ilmberger have a somewhat limited range for...
