Separate names with a comma.
Suppose it'll appeal to the new money Bentley owner (Footballers etc.) that wouldn't otherwise have bought a bike but will make an exception for...
Prior to fitting a mono subframe I had a mono seat on biposto frame and you need a different mounting bracket with more offset for the latch pin...
I wore Arai for many years, fitted me just fine until they changed something with regards to the opening size? I couldn't even get it on my head....
Do you mean the crank plug as in this pic? [IMG] A little tricky to see through the top of the engine but if there's no protrusion, you're...
I seem to recall reading, on another forum that 999 type wheels are wider at the hub to allow for a wider sprocket offset, in turn allowing for...
They're all imported (unless you live in Italy) but, surely any question over resale value has long gone now that the bike's 20 years old,...
You'll find that the crankcase halves are a matched pair, meaning you'll need to replace both if you replace one. If it's not too bad a crack it...
Ignitech sell their own brand of pickup, supposed to be very good and not expensive.
Agreed. One of my many mods was to replace the rear Showa shock with an Ohlins. I bought said Ohlins on ebay and it appeared to be in great...
Factory manual calls for 0.7 - 1.0mm on the 'higher step' but I think that's too wide? IIRC, I set mine to around 0.5mm and it's always been...
Mine had a complete engine rebuild (including new valve guides) and then the 6th gear broke around 17k miles later. When I stripped it down I was...
You'll struggle with a regular puller because it won't fit in the available space but with the correct puller it will come off easily and not fly...
There must be some kind of hand pump for a reasonable price? A few years back when our drive was badly snowed in/frozen and the oil delivery...
Another 25 year bike here, bought new in '98. [IMG] A few mods, a bit of tuning and still running well with 51k miles on the clock.
That cam is under spring pressure (despite being Desmo, there are still valve springs) whilst in that position and is tricky to hold in place....
Download here within 7 days;...
I needed new rings for my Monster 944cc JE pistons (the original JE were incompatible with the nikasil bores so beware if buying them). Got them...
OK but, personally I'd still weld them on. Drilling/tapping is taking material/strength away from the arm. Having recently suffered a cracked...
I'd go with welding, if drilling/tapping or thread insert then it's only into the (thin) wall of the box section. In time it may 'oval' the holes...
Likewise my M900 had them in both cylinders but, I assumed this is because the older 900 engines have the oil cooled cylinders and so, restricting...
