Separate names with a comma.
Presumably you plugged the bike into a diagnostic computer of some sort in order to see the errors. When it reported fuel sensor error what code...
I couldn’t find the posts on here but found some photos from the time [ATTACH] [ATTACH] [ATTACH] In the last photo the top cap is the one with...
I had a Monster 1100S a few years ago, from the day I got it there was always a clacking sound from the front under sharp braking. I lived with...
I think you’ll have to disassemble the fork cap/preload adjuster/stepper motor and work out what’s going on within. I would have thought it...
I use the Gates Carbon Drive app which works consistently. Just need to make sure there’s minimal/no background noise and hold the phone’s...
Useful, thank you. It’s strange how the parts fiche doesn’t show any 1262 models until 2018 though :thinkingface:
No. I don’t think I’ve ever seen that.
An acquaintance has a 2016 registered XDiavel, the 10th letter of the VIN is a G which denotes the bike was built in 2016. However it has a 1262cc...
This is the stuff I use on the pistons and the seals when rebuilding and when cleaning a caliper. it’s from a company called ATE. [ATTACH]
When you disassembled the forks to change the seals did you back off all the preload before removing the cap?
Preload is set on each fork leg by adjusting the big blue nuts, clockwise screws it in and increases preload, CCW decreases preload. It’s not...
NOK are good seals, I’m fairly sure they make the seals for Ohlins. I’ve forgotten which bike it is and what the forks are, are they Ohlins?
That spacer is there so you can drive the bush in without damaging it. The seal rests against it, but it won’t affect the integrity of the seal...
No. What make were the old seals you removed ?
If you want to make sure the grease stays there and doesn’t wash out for a long long time use a white lithium based marine grease, available in a...
Not sure what your after Mike. There are no orings behind the piston, just the fluid & dust seals the piston glides in/out through. Of you had a...
Did the mechanic not start the bike after doing the belts? I think you perhaps ought to give him a call to discuss and get him to look at it...
Just be aware the Motul 660 fluid really should be changed annually IME. You’ll notice it goes really dark much much quicker than their regular...
In a word - No. I could give a long winded explanation as to exactly how the TPS and ECU and PC all work and interact with each other but that...
Yep, you’re right, I’m trying to find his other post now because for some reason I had in mind the single piston rear caliper with a single pin...
