Separate names with a comma.
Now have my bike back - fork seals all ok and the front wheel was slightly out of balance. All put right and 60mph vibration has gone. Have had...
Am in deepest darkest Norfolk! Have contacted the mechanic and he'll take another look.
Hi all The wheel weight issue will have to take a back seat for now. Got home tonight, went out an hour later to put bike away and looked at...
Chain adjusters are fine and I have tried your advice about front fork pinch bolts. Did have good look at wheels but couldn't see anything...
Cheers for the replies guys. Can't see any sign of a missing balance (but would probably be hard to see any way). Remedial question now - how can...
Hi all My 95 m600 has developed a vibration that only seems to appear at 60mph or so in 5th gear, think I may have also noticed it at slower...
Ok - removed crankcase cover, gasket mostly came off but cannot budge the alternator rotor nut. Have applied max pressure to rear brake and it is...
As ever - thanks for the advice. Will have a look for some sealant. Will make sure flywheel is done up good and proper!! Assuming I can shift the...
Am going to have a look at the spring soon. The Haynes manual advises to replace the crank case gasket; however, I have read you can't get them...
Thanks for the info Derek. Am I right in thinking that crank case cover needs removing to check/replace spring?
Hi all Since taking the engine out of my 95 m600 for a much needed clean up and repaint; it has now developed a weird and intermittent problem...
I did wonder if they were stuck in there - took a long time inspecting them, and they really did look like they were missing. Took her out today,...
Hi all - success!! After relentless tinkering with idle screw, balancing and mixture screws - all to no avail - I decided to remove the carbs and...
Hi - I have tried to balance the carbs using my vacuum gauges - but it was very difficult to get an exact balance. If you can pm me with any way...
Well, I've been tinkering with idle screw and pilot screws. Thought I had it sorted this pm - went out, didn't over rev in neutral, and pulled...
Hi all Have recently fitted a dyno jet 2 kit to my m600 1995. Wanted to have an open air box and K&N filter, but have left air box on and removed...
If I start with any choke at all - it revs like a b******d!! Have taken it out for a short blast - she soon ran out of steam :( As the revs...
Have tried to start her this morning - no luck, although yesterday's efforts probably drained it. Am charging as we speak. There was however,...
Hi - the diaphragms i took from my old carbs as they looked in better nick; and they're fine. I've got an open air box with a K&N filter, which i...
