Separate names with a comma.
I have a 2002 748, same year as the 998 with the enclosed fairings and both mirrors and radiator fairing are red
I've been super happy with the Michelin Power 5 on the track and in the hills. I can scrape my knees at the track with 100% confidence. The new...
Lean angle with 1098 stand [ATTACH]
I'm not sure the heads will work as well without the cams. Maybe I have a 916 with the opposite - standard heads & 748R cams. Valve timing is...
The Oberon slave cylinder has a shorter travel than the stock one. You could revert to the standard slave to see how that goes. Make sure the...
Those wheels are worth big money. Fix them up. It will be worth it
Depends a bit on the track. You don't want gearing too low that you are redlining 6th gear looking for a 7th. That happened to me once on my 748...
[ATTACH] You need some colour in there
Who doesn't like the look of the spinning clutch? Also it does help them run a bit cooler. Plus you only hear it when stationary/idling so it's...
Just because the battery is flat, doesn't necessarily mean it's gone. Put it on a charger for 24 hours and see how it goes. They do love to be...
A photographer caught me out in the environment[ATTACH]
You will definitely need to secure the bike by more than the rear stand as you withdraw the spindle.. One option is to switch the rider footrests...
It's not even red. Although the 2002 748R is the most collectable/desirable, 25K is serious money
Cheers bud. I don’t mind cutting but I was wondering if the 998 hoses fit the 748?? Don't buy 998 hoses for a 748. They're not the same.
my 748 has 90,000 km on it and doesn't burn oil or feel worn out at all
Fairly sure the 999 rear shock gas reservoir will foul on the exhaust. 999 front will fit but not easily. You will need the triples and handlebar...
You just need the proper Ohlins clamp or a copy. I mounted my phone connector as well on the damper[ATTACH]
What rear shocks are compatible? Any 916, 996, 998 Sachs, Showa or Ohlins What front forks are compatible? Only the Showa unless you get the...
I had this same leak from my base gasket. I just cleaned it every few weeks. It was fixed when I did the 853 conversion and put all new base...
Yes. It does. I should havementioned, I've used 1000/1500 grit as a follow up and then the autosol after that. Autosol is actually quite rough too