Separate names with a comma.
not tried a back flush. Ill do it before i put the fairing back on.
Radiator fins are clear, i did take it apart yesterday, removed the battery box, disconnected the coolant temp sensor and checked pins, looked...
fluid level was fine, move back to England would be great but been stuck in US for too long i think.
Just got home after getting stuck in traffic. Its never happened before but the bike overheated. Both fans come on at 219 and stay on but temp...
Thanks you so much for taking to time to do that for me. It was the way i ended up routing it, it just didnt look right. Thanks again
Can someone post a few pics of the front brake line routing please. Does it come between the yokes or behind both yokes to the master cylinder....
I got a reply back for Ohlins, they said the level should be 110mm with the springs installed.
Anyone know what the oil level/air gap should be for the ohlins forks on a 04 999s. Is it with the springs in or out ? I cant find this info...
Thats where mine broke , the pump base , i dug the sealant out then resealed it after i had soldered it back on.[ATTACH]
When the bike idles and you pull in the clutch does it stall ? If not it not the clutch. My bike stalled exactly the same way you state yours...
Thats not water damage , especially when its only two or three lobes
Think you are correct and this will fix his problem. I know mine has never stalled again since doing the balance and tps reset years back. He's...
Is there a way you can video whats going on ? It seems we are all missing something that will help fix this issue. My 999 used to stall all the...
The pump will prime and run when the filter is blocked. I tested this a few weeks ago. Look at "fuel pressure" post
You have to dig out the wires, look at the post "opened up a can of worms" i think i put a photo in there where i had to fix the wires
So this is what ive found out or should i say not found out. I had some new fuel tank module seals sent overnight, they were not ducati seals so...
Im trying to install the fuel module and i cannot get it back in. Does the seal swell making it a one time use? I didnt have any issues before but...
I tried different settings on the rear suspension and could not change the wear pattern on the edge of the tyre. The edge looked like the only...
just pulled the fuel module and checked the regulator. I submerged the regulator in fuel and supplied air pressure until the regulator released...
Filter already replaced.