Separate names with a comma.
Its not even that. the retaining plate should be regarded as a consumable with a new one every front sprocket, which in the scheme of things...
If the fit is snug to tight then just use the existing ones which are baked in there. If you’re losing gas from them then just pony up the tenner...
Cylinder stud spacing was different as well toso you could take them out to 955.
You probably do have them. They compress down quite a bit when in situ. Look at the diagrams as deep sump uses two small and one large iirc.
Part number 79010101A - 1 off number 35 on the diagram Part number 79010091A - 2 off number 36 on the diagram...
he'll get dry bummed on customs and duty but beater tanks are brilliant things. Practically all the grid at Macau and Suzuka and indi endurance...
You don't need the spier clip, it just makes life easy, otherwise a nut, washer and a bolt will do. All you really need is the spigot.
Yours is biposto so won't have the same fixings. Under your plastic rear cowl there will be a moulding to take the spigot - number 1 in the...
His wil be just glueing two scraps of carbon to it, yours was reconstructing a pile of torched carbon that looked like a broom back into a...
Just glue a piece of carbon or dense plastic and redrill the holes or 3d print one and bond it on. the M6 rivnut is a 9mm clearance hole -...
literally a self tapper or equivalent screw. At the back you got a spigot that pushes into the rubber grommet on the subframe.
That's a bonkers good price for a par of these, and your stuff is always really well kept. GLWS.
@Cream_Revenge to the been there done it phone.
nope. They all came with plastic ones, even the R's and SPS's as they all had to take the stock air filters, and none of the aftermarket /...
That's repairable very easily. I don't mind doing it for you if you're not confident.
what's the problem with the indicator fixing you're having?
And it better be in full colour as well, none of this monochrime crayon malarkey :upyeah:
Sure no worries. Let me see if my tame ndt guy will receive them and give them a once over just so we can make sure for certain the ply structure...
On first impression the barrel seems unaffected and the stressing is more resin / lacquer related as there's no obvious delamination visible....
Send me some pictures through and we can go from there. :)
