Separate names with a comma.
Is the 1260 workshop manual available?
I am an IAM Observer as well and I tried Cormarket a few years ago but they couldn't offer a breakdown cover as a complete package. It seems...
A simple question prompted from recent experience. I am trying very hard to get an answer from my current broker ( not sure if allowed to name )....
1200s 2013 - 75000 miles and going strong. All services done by myself and getting ready to do the 5th Desmo. Mileage on dash shows only 9800 (...
On mine I replaced seals, bushes and oil at 66500 miles. I used 2.5 weight oil ( bit of a confusion in the workshop manual as to which one is the...
Note that the oil in the right fork is the important one. The oil in the left fork is just for lubrication and not critical. Oil spec is another...
2013 here - 70200 miles and going very strong. Is mine the highest? Odometer now showing only 7200 miles -
@johnalex - ... and double check that stanchions are in perfect condition. File down any scratches or burrs with a very fine sandpaper. The good...
This is what I used and since then no leaks - all perfect. "Got the SKF KITG-48Z and look the same. Also ordered the bushes from Brook...
As @Bumpkin, have done the same years ago. Got a blank key from China, a red one as well:)
... try to remove and refit the front mudguard on the 1200...
They do supply heavier springs and in different colours as well. :) My rear preload now is on 18, sport and touring solo and on 20 for solo with...
It feels great - like new! I wish I had it done a year ago... instead of trying to compensate by increasing preloads etc.
@bradders - wish I didn't say how much now.. :) only joking :grinning:. Jobs done! Now back to square one trying to re-adjust sag and damping.
[ATTACH] [ATTACH] [ATTACH] OK. The standard straightforward rebuild is £170. Now, with the shaft re-chrome, new bearing, new piston and cap it...
Just for completeness... Shock removed, after a lot of fighting with a seized up lower bolt, and sent to T-Tech Suspension for repair. Shock...
Shock sent to T-Tech Suspension for repair Shock repaired and returned to me very quickly - actually was repaired during the weekend (received by...
Success!! I used my heat gun around the bolt head area. I used a metal plate as a heat shield around the cable and cover the cable with a wet...
An old thread but very useful. I find myself in the same situation and after trying all day long today to remove the bolt is seems that I have to...
An old thread but very useful indeed. Now I have the same problem and after trying all day long today to remove it it seems that I might need to...