Separate names with a comma.
Here’s the wiring diagram. Relay 43 is the lighting relay energised by the instrument module. After that the high low is selected by the switches....
In the case of my 1098 it’s simply a switched 12volts ie no module. I’m sure the sane for 848, 1198
AI point of view For a greased thread, the recommended torque is lower than the dry torque value, typically 25% to 50% less. To find the...
Here’s an independent in Scotland. Never used him but he’s highly recommended. https://northmotorcycle.co.uk/
https://kojaycat.co.uk/epages/950000457.mobile/?ObjectPath=/Shops/950000457/Products/3W-CNA-WHT&ClassicView=1
Page 407 https://ownersmanuals2.com/make/ducati/superbike-749-dark-2005-9630
[ATTACH]
Is your bike in the list ? to check https://www.ducati.com/gb/en/service-maintenance/recall-campaign [ATTACH]
You can buy the official ducati tool. Item 14 [ATTACH] [ATTACH]
Try this link for torque settings for a monster 937. The rear wheel nut is 145Nm...
Not available separately from Ducati.
Same part number listed for 2009 and 2010 model
Good source to check price of parts. https://www.bike-parts-ducati.com/
2009 pump [ATTACH]
Could be this. https://www.henkel-adhesives.com/ph/en/product/threadlockers/loctite_2480.html
I also wrapped gas type PTFE which is thicker around nipple to seal and aid the vacuum sucking process to reduce air bubbles but to no avail in my...
I experienced the same problem on my 1098. Bled the brakes and all fine convincing me there was no air in the system. Would work fine for a while...
Not cheap. https://www.bikesportdevelopments.co.uk/race-specification-wiring-ducati-848-1098-1198-749-999-998-996r
For my own information does your battery compartment have a width of 87mm ? I presume you already have a YTX14 fitted ? It would be good to know...
[ATTACH] For reference see pic. The terminals are the correct way round it’s just they’re fixed to the terminal at front. Saying that from the...
