Separate names with a comma.
Although I was/am somewhat p****d off about getting my battery back in the same state it was sent away with, in fairness to the supplier they have...
So, after making all the wiring connections & fitting the new battery I removed the spark plugs & spun the engine over a few times to get some oil...
Got all the wiring connections finished to the engine today, neutral switch, oil pressure switch, magneto kill connection & starter solenoid & the...
Got the electrical connections finished at the front end today & checked as far as possible, i.e. powered up the speedo & checked the idiot lights...
Bit more progress made yesterday. Started by securing the clutch in place, which requires locking in place while the hub nut is torqued up. The...
Steve Slight, (Jobey) of "Jobey's Airbrush Art" did the paint. He's in Wells near Glastonbury. It's a bit of a trek for me from Stockport, but he...
More progress made today ! Primary drive & engine are now locked in place as is the rear wheel after checking the sprocket alignment with the...
In fairness, I gave Joeby the colours & a basic idea of what I wanted, (he'd already done the first bike) & left him to it so all credit to him...
Just got back from Wells after picking up my paintwork. Couldn't wait to chuck it on, just to have a look :upyeah: I'll underseal the mudguard...
Battery strap is all tacked in place now & seems to work OK, allowing the battery to be changed/removed without too much trouble ! [ATTACH] The...
After trying my new battery strap on the bench I realised that the two securing legs were too long to allow it to swing up past a frame cross tube...
Got on with securing the battery yesterday & today. I need to get the bodywork painted & I knew I was going to have an issue with clearance for...
The front brake is now final fitted & bled up along with the front wheel. I've also checked that the speedo works with the gearbox sensor that...
Made a bit more progress today, now that I'm home for Christmas. Finished off the rear brake pressure switch & got that fitted into the master...
Love it, a timeless body shape, roll on the summer I hear you say !! :upyeah:;)
Spent the day in the garage today making a start on the wiring loom. I want to check it all works before I shrink sleeve it all & route it through...
I have an Autec hydraulic bike lift & a Skylift, both have their pro's & cons. If floor space is an issue you should bear in mind if you can't...
The re-assembly continued today. It takes much longer than you anticipate to re-assemble things after painting/powder coating ! The forks are...
Thank you & it's good to hear members like what you do in your shed/garage, or at least enjoy the process. I'm sure it's not everybody's...
Been to pick the powder coating up today :upyeah: Just got to remove all the screws & plugs now ready to start the final build up. [ATTACH] [ATTACH]
