Separate names with a comma.
I was able to try a few different standard maps and find one that worked out pretty well. Still not as nice down low as I'd like, but VASTLY...
I had some time a couple nights ago and was able to poke around on the bike. Re-checked the throttle body sync and found everything to be good....
The O2 sensors are disabled on account of the Tuneboy. That's been that way since before the service... I should probably reiterate (or state if...
The MWR flows more air than the stock paper filter, which was horrendously clogged with debris. So the end result is that I'm flowing a LOT more...
I'll find a good machine shop who can true up the rotor mounting pads while maintaining the perpendicularity w/ the axle...
The closers are good and were re-measured after it was all back together again. I'm confident in my work. Pretty straight forward. My nearest...
Just so I'm clear on your method...are you bending the rotors? Or are you shimming them?
The openers were good, but the closers were all adjusted. Belts went back on correctly and rotating the engine didn't vary the alignment. I'm...
I've been down the same route myself. 1. Swapped stock pads for Galfers. No change. 2. Cleaned and checked bobbins. No issue, so no change....
Did my first track day last weekend on my 2011 MTS1200. Far from my first track day, though I'm FAR from the fastest out there. Curious what...
The biggest thing I cannot revert to would be the blocked air filter. I'll have to grab a picture off my phone later tonight to show, but there...
Hello all!, if this thread belongs somewhere else...please move it, moderators. I couldn't find a specific ECU-related forum... With that out of...
So, quick update. I still do not know what causes the tail light to stop working. It happens during a ride, and of course, I cannot see when it...
I will absolutely keep you posted. I've run their tail light on my FZ-09 and FZ-10. Great product. I had one lens pop off while on the highway,...
OK. I'm running this: https://www.customled.com/products/2010-2011-2012-2013-2014-ducati-multistrada-1200-integrated-led-tail-light
I will try holding the brake solid with the engine running to do see if that trips it. I'm also going to disconnect my top case's running lights...
I've tried searching to no avail. Hoping someone here has some ideas, but I'm a little confuggled. 2011 Multistrada 1200. Just installed...
Honestly, I'm a bit confused on how Ducati's (Brembo) radial calipers collect all this grit to the point of causing issues. Understandably, a...
Well, I definitely was not planning on upgrading the brakes beyond pads on this bike. But, it's a good thing that we are dealers for Brembo and...
Video or it didn't happen!
