Separate names with a comma.
These 5 spoke Marchesini's came off a 800ss ie. Rear is straight fit(17mm axle) but the front I had to make sleeves to adapt the wheel to fit 1993...
I finally got around to fitting the modified bar end mirrors which are 60gms(each) lighter and they are clearer than the originals. They are...
Thanks for all the info guys, I've not had anything to do with the 4v Ducatis so if I ask stupid questions be gentle. This bike is actually nearly...
I did a bit of bracing and also shortened the length of the mirrors by 30mm. It has helped but not eliminated the problem, but it is way more...
I'm in the market for a 999s and am wondering if there is a cross over period for the 4 vent front fairing to the later 2 vent front fairing. I...
While you are in there make sure the drain from the ally piece(with the 8 m4 grub screws) to the bottom of the tank is clear. I have just done two...
[IMG] Has anybody successfully braced the arms where the mirrors mount to stop them vibrating really badly? I had a 900ss ie which did it and now...
I recently bought a 1000ds that had been sitting for awhile(years I think) and I have got the bike running but the injectors were gummed up and...
[IMG] I'm not sure that a 748 runs the same brand of oil control rings as a 900ss/900 Superlight but I had the same problem as you when I went to...
I looked in the parts fiche to see where the little filter is by the tee in the fuel lines. They call it a jet but which line is it in? Is it in...
I bit the bullet and bought a kit direct from EMS, hopefully it won't take too long to get here. Now I should be able to service stuff as needed.
Not the same motor but I took these photo's at the Historic National Titles at Collie West Australia in 2019. [ATTACH] [ATTACH] They use a feed...
Is there anywhere that can supply the std 8mm valve shim set that EMS other than from manufacturer. The postage cost from the USA to Australia...
Great article and well done on the project! Could just about be the ultimate "Superlight".
The bike is rebuilt and has been on the road for about 10 months. The Fuel pump was dry stored while I restored the bike and it worked perfectly...
Thanks guys, I'll try some of the suggestions to see if I can get around the electrical noise problem!
Info from Liam Venter at Fastbikes.com(off his website) in NZ are that these Ultrabatt batteries are a not the same as other lithium batteries....
[ATTACH] [ATTACH] [ATTACH]
I have a 1997 900ss fitted with a Ignitech ignition unit in a mounting just to the side of the std fitment of the ignition coils near the battery...
We did have a local supplier for the "CABER-SRI" oil control used in the 900ss/monster but he didn't carry the narrow width version I needed. So I...
