Separate names with a comma.
Thanks all.... I know me well enough to realise that things are bad.... ...but I do think it is a bit early to be saying goodbye.....I'm not...
I haven't been told how long I have. The medics won't commit themselves other than to say if I get any kind of respiratory bug, I have probably...
....wondering if I should tell you I am dying.... Well, now I have told you.
The chamfer is what tells me it should be smooth side up, otherwise there is no reason for the chamfer. Also, what a water trap it would be if...
ID of the washer is a slight fraction over the OD of the stem....
[ATTACH] Unless the headstock design on the Monster is different to the SS, the nut thingy doesn't make contact with the bearing at all.....there...
Have a close inspection of the nut cut-outs......the spannering burrs on each slot should tell you which way round.....on yours, they look like...
Haynes is just about correct......for once. Workshop manual states 0.027" +/- 0.004"....... that's 0.6858mm
As far as I am concerned it is a farce. I am in the extremely clinically vulnerable group. In the cold weather I can't even go outside for a few...
It would be worth taking the alternator cover off to check the pickups. If you need an oil change, drain it before removing the cover. If not,...
[MEDIA] [MEDIA] [MEDIA]
I notice from your posts, one minute it is the vertical cylinder that stops firing and the next post it is the horizontal cylinder that does it...
The tickover wouldn't be a particularly good one if a spark plug cap was faulty......(well, actually it might be good....for a single cylinder...
Do both slides lift evenly from about 2500rpm up to the 4000rpm? If they don't it may be because they are out of balance or there is a hole /...
The pilot circuit controls the low revs running up to when the slides should be lifting so the main jets take over between 2500rpm and...
My old man 3rd from left, rear row.....note the 4th from left, rear row.....if anyone knows anything about earlier teams.[ATTACH]
I got my non-adjustable Marzocchis working pretty well.....I used Agip SAE 7.5 oil in them. However, it still didn't improve them as fully...
'Hedgehogs Anonymous'........?? Great name for a band.... ......seems familiar though.
Add a request in the Wanted section, too.
Bob Dylan (wrote it and performed it) and U2 did a cover on Rattle and Hum, I think.