Separate names with a comma.
Anyone found a good replacement for the OEM sidestand that is longer? My bike is a little raised on the rear and leans too far on its stand. I...
I'm back to post on other things but thought I'd close off this thread. Turns out it was a spacing issue, and a very thin spacer on the RH sorted...
All really good feedback guys. I know about one crash in its lifetime, but don’t know why it’s not a pair because the ‘crashed’ forks are still...
I was wondering whether it might be the axle itself - if that was wrong eg if the step in the axle was not the correct length or the axle itself...
I noticed for the first time today that the speedo drive has one ‘tab’ to catch the wheel but the wheel has two ‘slots’ for the speedo drive,...
I tried with top clamps only tight to eliminate the outer potentially interfering with innards (bottom loose) and pinch bolts loose, axle not...
Needed new springs, too hard before. They weren’t great but not this exact problem.
The only thing that stops me doing that is that I’ve had the forks off the bike and they seem to work fine when compressed manually. So in...
The forks seem to be exhibiting normal wear. It feels like it could even be some form of hydraulic lock. It’s only done about 1000km since...
[IMG] the forks are the type where the axle threads into the fork.
Shock Treatment in NSW first asked me to check the top clamps weren’t over tightened, and to check that the forks were ‘floating’ something about...
Yep tried that. The springs have been specifically set for my weight and were working ok, although not perfect. I backed off compression and...
Have done a lot of stuff today and one of the things was to loosen the axle a little (not fully just not torqued) and it still did it. I will try...
It’s on compression, although it appears to happen after the rebound stroke. It’s weird but if there’s enough motion and downward pressure it...
Hey Guys My forks are binding at slow speed/stationery, which manifests itself in some pretty crazy handling at slow speed and likely interferes...
Today's pic before the rain came down! [IMG]
I've learnt a lot about suspension over the last six years between starting racing and also rebuilding some classic forks (not the upside-down...
Yep, it's been a big challenge to get it sorted. The suspension has been the biggest issue, between binding forks, wrong springs, leaking rear...
About 8-9 years ago from memory.
Hope you’re all travelling ok in the current madness! [IMG] It’s taken me all this time to finally get the bike to a point where I could start...
