Separate names with a comma.
Hi I have about 200 shakedown kilometres on my Pantah and, after dealing with a couple of minor adjustment issues, it seems to be running very...
Hi Eran. I well understand your frustration, having put in a lot of work to reach this point and now find the bike will not start is a real...
Thanks Sam, pouring with rain here in BC and probably not due to stop raining until late February... Once the roads dry out I will try and put...
You are right Sam. The new bush and some grease solved the bark. When everything was cleaned up I found the previous owner had drilled a very...
Hi Eran, apologies for the slow reply. I won't profess to being an electrical wizard, but the set up outlined in my original post seems to work....
Hi Eran I would definitely make sure that I was exactly at TDC on the front cylinder before attempting to line up the flywheel dots. As Rick...
Hi Eran, mmmmm something is not quite right. Are you certain that the front cylinder is at TDC? Put a rod in through the plug hole until it...
The original neutral switch on my bike had failed internally. The switch tip did not close the circuit and light up the neutral light in the...
Yesterday, after much cursing, I gave up on trying to undo the rotor nut on the end of the crankshaft. Despite the creative use of cheeter bars...
Good point.
I am going to investigate further before I dive too deeply into the engine. I do need to replace that damaged locking washer though. I suspect...
That's interesting Chris, so you don't need to fabricate the special Ducati tool (88713.0108...), you can just use this torque wrench to break the...
Many thanks for the insight Chris, your comments are very helpful. In removing and looking around inside the LH cover I noticed that the...
Having sorted out most of the bikes electrics I tried the starter and found that it has a distinct "bark" as is slows to a stop. I am guessing...
After I installed a fresh battery my 1981 Ducati Pantah, I found that none of the lights on the dash worked. Ironically, the only bulb that I...
That's a helpful picture for me. My starter solenoid is an aftermarket item, I believe from a Japanese bike, that was tie wrapped to the...
If you want to read a bit more about silicone cables this link is a good starting point....
Hi Eran I bought the shrink wrap from my local NAPA autoparts shop. It is distributed in western Canada by a Vancouver-based company called...
Hi Today I finished fixing my pickups and I thought that I would share a couple of points that might help someone else doing this repair. My...
Hi Rick, that is a very kind offer and I would be very interested. If you can measure the resistances that would be awesome. My good pick up...