Separate names with a comma.
Hey guys, After putting the engine back tougher (replaced piston rings) and putting all back in the bike, when i started for the first time...
I'm after a set of piston rings for my Pantha 600, i have contacted Cox and Turner in the UK and they say that they can provide rings - the price...
Haven't updated in a long time. My bike is almost finished but i have low compression on the front cylinder. around 120-125 when the engine is at...
Sent you an e-mail
My Pantha rebuild is almost complete, sorry for not updating for a long time. My front brake master cylinder is toast, its a rare brembo PS14,...
been long since i updated, bike starts and I still didn't get it dialed to idle good, but there is progress, so i feel im almost there,...
A Small update, The bike starts on choke, but if i'm not holding the throttle at least 1/4 turn open, it wont hold. also, without the choke opend...
Will try that as well, thanks
Thanks for the encouraging words. the carbs have been completely stripped, ultrasonically cleaned, all seals are new as well as new slides,new...
Hi guys, haven't posted for a while on the Pantha project. the bike is done (more or less) entire rebuilt wiring, carbs have been cleaned, vapor...
Wont the current from the active side turn on the non active side if both + are connected together?
Thanks, i thought about grounding the LED negative side and connecting bote + feeds to the positive side, do i have to use diodes? which one can...
Been a while but i finally converted the light to led's too, one thing that i couldn't figure out is the the indicator light. in the schematic it...
Oh, can i just join the two reds from the regulator? or defiantly leave one disconnected?
Thanks Derek, so, yellow wires to yellow wires from alternator One red to the battery \ main fuse feed (doesn't matter which one of the red...
@Derek
Thanks Rick, it was given to me together with the bike, since it's new i was thinking of using it instead of the old one. I also got some other...
I got a brand new reg/rec of a Paso 750 (see picture) that i want to fit my 600 Pantah. the new unit has 6 wires: 2 Yellows, 2 Reds, 1 Black, 1...
I think i got it now, i put the engine on its back so the front cylinder is pointing up, it easier to use a stick in the plug hole like this....
I'll try to explain exactly what i did: First, the flywheel wasn't off the engine so i didn't touch the woodruff key 1. aligned all three marking...
