Separate names with a comma.
So ordered the main paint from ebay, prepped and sprayed the case with primer today. The bike shed is currently a temporary spray booth [ATTACH]...
Your thread is great, just what I could of done with. Cheers pal
Change of plan, once that seal was moved, it was easy clean any media out with the jet wash and lashings of brake cleaner.. New seal on order
What a job! New one ordered and on route.. Blood, sweat, tears, dremel, pick, flat screwdriver and a piece off plastic for protection of the...
So before I make a cracking at it.. I first try to freeze the whole case Then remove the bush seal, will long nose pliers work for that? Then...
After re threading the oil sensor area, I have now vapour blasted the casing and noticed some of the media is still in side the chamber, so...
Which etch primer did you use pal? Do you have a link? Cheers jamie
Im using this little hidden gem, also the reason im having to repaint a perfectly good case [ATTACH][ATTACH] [ATTACH]
what a great match pal. Did you etch primer it and also lacker it?
Will have a look at the rs paints, also seen these mentioned[ATTACH] [ATTACH] [ATTACH]
For some reason, a section of my clutch side engine case has had a reaction and the paint has come away and can see the bare aluminium. Does...
Cheers guys, a few taps and a few choice words, and she's off [ATTACH]
Good day all, After some tips on removing an engine case that is sealed on well with uni bond? Don't want to damage the paint or the mating...
Right checked all fuses and all ok, striped down the battery box and cleaned all connectors on the relays and solonoid, put back together and...
No click or anything.. but would the solenoid affect the neutral light and the main batt light?
Good evening, So long and short of it, did my belt change on the 916 so only removed the petrol tank, battery and tray, starter solenoid and...
Perfect cheers
Guys, I did the belts and can't for the life of me work out where this double connector clips into? Also the black box, how does that...
Had a friend who builds engines pop round and all is fine with the bike, timing is spot on and tensioned now.. now time to rebuild it back up......
Right after a battle the new belts are on the bike. Was quite tough, maybe need some stronger muscles So next questions, maybe im panicking...
