Separate names with a comma.
Hi guys, can any of you confirm if there are supposed to be dowels, or no dowels, between the crankcases and barrels on the later bevel v-twins?...
Hi Chris, funny, only a few mins ago, I discovered this exact video! He seems to know what's he's at. It's common sense to have shims on the shaft...
Hi guys - I am aligning the mesh of the lower bevel gears on a Darmah. What puzzles me is that the parts book does not list shims for the shafts...
Bullseye, NZDave. Thanks. The code of the bearing Vee Two supply is 7307X2ETN. I certainly trust those guys. There's your answer, Ducv2.[ATTACH]
Thanks Keith P — I'll take any leads I can get!
P.S. The old bearings had THRUST etched on one face, indicating the side where preload is to be applied.
Guys - do any of you have to hand a correct main bearing for the later 860cc engines (e.g. Darmah)? I'm looking for the bearing code - not the...
I wondered if someone would notice! It does work but only at half speed (2500 indicated=5000rpm). The 60mm electronic rev counters are easy to get...
Spot on! Yes, Skerries (for UK members, it's in North Co. Dublin). Also, not so far away, a classic car and bike gathering takes place each year...
Paddy, yes, almost there! The two tiny screws and the C clip were already off. There is still some resistance and I am always cautious the first...
Has anyone here taken a bevel starter motor apart? I just need to replace the cable, but I don't want to damage anything. The sheet steel casing...
Hi guys, this is my 1974 Desmo 450. It has had many rebuilds over the years, the last one after I retired it from road racing in the early 00s,...
Rick - It's a roller bearing crank from a 1980 Darmah SD.
Thank you, Fire 3500, I will bear them in mind.
Ah, Paddy, thank you. Will do, thanks!
Hello everyone, a question for anyone here who has had a bevel twin crankshaft rebuilt in the UK recently: Who would you recommend? I would have...
