Separate names with a comma.
Update - my clip fixed worked for a while but eventually more of the display was missing or would randomly reappear. Sourced a complete 2nd hand...
A new dash is £900 + dealer reprogramming cost- my dash has different issue but I sent up to Autotronics, they were pretty good ( my dash could...
Thanks, I was chatting with a local mechanic who does Dukes and others - his experience was that if they look OK they will be alright - so pulled...
So update - sent the dash up to a company who specialize in repairing dashes and quote the 848 dash on the website - good service but stated that...
recent upgrade battery lead kit came with A tube of dielectric grease to go over terminals - I noted that some of the Ducati connectors already...
Update - looking at the wiring the datatool had broken into the fuel pump line ( brown/white) hence why I had sparks but could not smell fuel -...
Checked micro relays all good, so onto the datatool alarm. Followed cables from the alarm, one group to the tail which will just be flashing the...
Ignore the clip of the relay.
Just had a quote for new dash ....£924 + £200 estimate for fitting...... [ATTACH]
Yep had the datatool in my sights and the micro relays next. I forgot to state that it had a new battery with the cable set.
Well things have gone from bad to worse. Started from basics pulled the coil of the horizontal plug and checked we had sparks with a spare plug....
So I have 3 bikes including the 2012 848 EVO ( with Datatool alarm) 5K miles and serviced at 4K but back in 2014 ( I bought it 2021) I...
Need to rework these links as a lot are dead
Bill Gate's will has been revealed recently. Apparently one section deals with end of life if attached to a life support machine - if he passes...
Thanks all, nut finally off, the Clarke is a bit of a beast and took it off in probably 2 seconds, used cloth on nut and covered base of wheel...
Good tip re the rag -I have learnt the hard way that I should also put some thick old towel around the bottom of the wheel through the spokes so...
Thanks all- I have a 1" steel impact socket and I machined the front down to remove the inner chamfer to get full engagement. So its tool buying...
Trying to undo the 46mm rear wheel nut from the 848 rear wheel - getting silly now with colossal leverage and nothing, tried my relatively low...
Having just done my first 2 I used the package from Abba Stand ( bead breaker, tools, rim protector, lube and balancer. but it I guess that's not...
Thanks for the tip will try that next time
