Separate names with a comma.
Sorry fit the late response. The 899 and 1199 have a 3 screw attachment for the Y piece where thr two pipe meet. The 959 and 1299 use a clamp...
Morning I assume its the bolt holding the mirror arm to the fairing/chassie? Does this help...
Thank you very much @LiveFast...... That's super useful information and makes total sense. Ill drop those enrichment and enleanment values down...
Thank you for sharing. That's really useful to know. I am backing up the RB settings from time to time but was not applying them as I figured that...
Ah! I see what you mean about the Auto Trim settings. Its really not clear but when you Right Click on the Map1 & Map2 tabs, there's an Add...
Thanks for taking the time to do this, it's gratefully received. I'll pull the fairings off (any excuse to tinker with the bike for a while) and...
Thanks for taking the time to reply @Nathanhu I haven't checked it recently to be honest. I did have the front end apart earlier in the year to...
Thanks for the response @Nathanhu ! I've uploaded the auto trim setting for you. As you can see, I've recently reset them then rode to Weymouth...
Hey I have an 899 with a Rapid Bike Evo installed (mainly for the autoblipper) I found that very occasionally, I get a misfire usually when at...
Well, you can certainly give it a go if you dont have access to JPDiag. The front wheel sensor is behind the front mud guard on the left hand...
I think you would be better off getting the codes scanned first, if you have the ability to do so using JPDiag and the appropiate USB / Ducati...
Sorry to hear the trouble you're having. Have you checked the flappy exhaust valve? It's a long shot but maybe it's stuck closed. Also, have...
If it helps, mine are very close too. In fact, when I took the rear shock & rear wheel off, the swing arm dropped down and marked it against the...
Sorry if this is off topic slightly, but is that the result of something catastrophic, or just general build up? I assume something exploded from...
On my 899, the old plugs had a gap of about 0.95mm after 9500 miles. New ones were about 0.6 to 0.7mm if that helps. I'm no longer convinced...
@Lindsay McConnell Coincidentally, it was the same on my 899, the V cylinder prevented it starting. Replaced that plug and all fired up nicely but...
FWIW, you can see the MAP sensor values in the Melcodiag software. Mine shows as 0 or 255/254 with just the iginition on (I'm not sure if thats...
From what I've read, you need the basket. Im not sure if the 1299/959 would work, I think they would, but its a completly different baskey from...
I bought mine of eBay, like @Phill748 said, they dont come up very often. Mine was more chipped than I would like so I sprayed mine Black with VHT...
FWIW, I had this on my 899 recently. I was sometimes getting a drop of a small amount of coolant out the left hand side of the engine from the...
