10mm clutch pushrod spacer or longer post 2001 pushrod!

Discussion in 'Wanted' started by stretta, Aug 4, 2012.

  1. Wondering if any of you can help me find either a 10mm clutch pushrod spacer, or even a longer pushrod from a post 2001 model bike (which I think is when they went to the longer pushrod?).

    The slave cylinder seal has gone on my 1998 ST2, and I have a standard slave from my 749 lying around!

    Cheers!
     
    #1 stretta, Aug 4, 2012
  2. Could you chop a length out of a 10mm bolt? How long is the spacer? :smile:
     
    #2 470four, Aug 4, 2012
  3. Just pop a 6mm ball bearing in there......
     
    #3 nogaromill999, Aug 4, 2012
  4. Thanks for the replies fellas, do you know the dimensions of the spacer I need? I'll try to fab something from scrap!
     
    #4 stretta, Aug 4, 2012
  5. #5 470four, Aug 4, 2012
  6. The dia of the push rod and 10mm long.

    brian.
     
    #6 Brian91cfr, Aug 4, 2012
  7. Push rod is 9.5mm diameter and you need 10mm spacer.
    HTH.
     
    #7 antonye, Aug 4, 2012
  8. Thank you gentlemen, I'll sort it!

    Cheers.
     
    #8 stretta, Aug 4, 2012
  9. Just a word to the wise, a ball bearing is more easily removed if you get it wrong........
     
    #9 nogaromill999, Aug 5, 2012
(You must log in or sign up to post here.)
Do Not Sell My Personal Information