First and foremost before i start thanks to @Jamie Clare - I made something out of an old 4 Litre Milk carton, then a bit of mild steel which was a bit of a knife and fork job with some tin snips and he turned it into something that works...really well.! Any of you with the old 796/1100's will know that once you trash the stock oem system it all becomes well, a bit of a mess underneath, in that if it aint stock its quite difficult to stop all the mud and dirt spraying up over all of the electrics. My last hyper had the same problem (1100Evo with twin termi's - the plastic bit was held in with tie wraps and while it held it was messy - this is what i came up with which on that system again worked well. So, moving on - my evo sp is a totally different setup (twin SC Projects) so the bit of the twin termi's well, isnt there..just a big hole...ready to accept just the slightest bit of precipitation. Here's the hole...(get the puns in now) And here's the mudguard...small but effective... And fits in perfectly....cant see it and its really effective. Hole filled.... Bit of a boring review but, it works well and is really effective. Thanks Jamie - works a treat. Sorry it took me this long to put something up.
