Anybody measured their front disk runout? Just measured mine at 10 thou left disk and 6 thou right disk. Not sure what it should be?
That's the problem really. Suspected warped disk at first as there is a similar feeling but no pulsing through the lever so the pads aren't getting pushed back like a warp. Started off just spinning the wheel slowly on a paddock stand and measured movement. Then moved the disk about by hand so the bobbins got worked and tried again, very similar reading of around 10 thou. Lightly pulled the brake lever to try and centre the disk the tried again and similar figure. Just wandered what others are getting?
