I’ve sold my 996 this week so these are up for sale. bought a few 4 or 5 months ago, I had them fully serviced by Bob Grant Racing in Fife/Scotland. Was told they are FG8910 ohlins from the guy I bought them off, come with a nice bottom yoke ( looks to be new ) and standard Ducati top yoke. They fit straight on, use the same wheel spindle and calliper bolts, discs will need spaced out 5mm either side or use 748r 996r discs with 15mm offset. I have disc spacers I bought, 2.5mm so I have 2 for each side, plus I have longer (20mm) shallow head stainless bolts that will come with the forks. You’ll need a 749/999 mudguard and 51mm clipons to finish the fitting. looking for £1500 collection ( Fife ) would be preferable but I will post if needed. I may be travelling down to South at some point if I find a bike that I’m after.. so could possibly meet if that helps. Thanks
I don't think so, it should be stamped near the steering tube and the Öhlins triples I've seen don't have the pinch bolts on the outside like that.
By typing @ followed by the members forum name sends a message to them to highlight the post. Chris has just tagged the original poster for you. Andy
Hi, sorry forks are sold, I sold them with the bike but will ask the guy that bought them if they are for sale. They haven’t been fitted to bike and sitting there I believe.
I didn’t get a chance to fit them, guy bought the 996 off me and came back for the ohlins. will let you no tomorrow if they are available