1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

748-998 Small Rear Paddock Stand

Discussion in 'Wanted' started by cookster, Feb 23, 2020.

Thread Status:
Not open for further replies.
Page 1 of 2
  1. Hi guys I'm after a small paddock stand for my 996. Something like this...
    Screenshot_20200223-092015.png

    Thanks
     
    #1 cookster, Feb 23, 2020
    • Like Like x 1
  2. Good luck;)
     
    #2 Expat Jack, Feb 23, 2020
    • Agree Agree x 1
  3. I’ll keep a look out for you.
     
    #3 bettes, Feb 23, 2020
    • Thanks Thanks x 1
  4. What about getting one made to the same exact dimensions?
     
    #4 Expat Jack, Feb 23, 2020
  5. It doesn't have to be an original chaps just one that small. I've got a plan!! :D
     
    #5 cookster, Feb 23, 2020
    • Like Like x 1
  6. Might be more hassle then it’s worth. I bought mine of gumtree for £50 and it’s the proper Gubby jobby even came with the short pole for locking the rear wheel.
     
    #6 bettes, Feb 23, 2020
  7. @bettes can I have yours then mate?? :p
     
    #7 cookster, Feb 23, 2020
    • Funny Funny x 2
    • Like Like x 1
  8. thinking about it mate, one of those pit bull stands would be a doddle to make. Could even make one for the opposite side...

    B8A64213-5FB9-4594-9E63-A925C602A857.jpeg
     
    #8 bettes, Feb 23, 2020
  9. Of course you can, mate. But you’ll have to buy the bike too! :joy:
     
    #9 bettes, Feb 23, 2020
    • Funny Funny x 3
  10. The R&G one I have on my 748 looks smaller than the pit bull ones
     
    #10 Expat Jack, Feb 23, 2020
  11. Can you stick a photo up. All this talk is getting me in the mood for fabbing a new stand for the opposite side? :).
     
    #11 bettes, Feb 23, 2020
    • Like Like x 1
  12. It’s just a standard type single arm thing.
    image.jpg image.jpg
     
    #12 Expat Jack, Feb 23, 2020
    • Like Like x 1
  13. Looks decent enough! :upyeah:
    How much do they go for?
     
    #13 bettes, Feb 23, 2020
  14. I think I paid about £80 for it as a second from Demon Tweaks eBay outlet. I had to give one of the wheels a tap with a persuader to line it up and jobs good. Think full price is around £110ish. It’s pretty solid to be fair. Got one for my Striple too (2nd hand for £35).
     
    #14 Expat Jack, Feb 23, 2020
    • Like Like x 1
  15. Al, let me know if you want dimensions and I will measure up.
     
    #15 Expat Jack, Feb 23, 2020
    • Like Like x 1
  16. Cheers mate @Expat Jack

    Looks like I could get one of those and chop the handle down and 're weld it.
     
    #16 cookster, Feb 23, 2020
  17. 54 cm widest point (outside of wheels).
    68 cm front to back
    40 cm from front to kink where ‘handle’ bend starts.
     
    #17 Expat Jack, Feb 23, 2020
    • Thanks Thanks x 1
  18. Rare as hens teeth,good luck.:upyeah:
     
    #18 XH558, Feb 23, 2020
    • Agree Agree x 1
  19. hens-teeth.jpg
     
    #19 Birdie, Feb 23, 2020
    • Funny Funny x 1
  20. #20 XH558, Feb 26, 2020
    • WTF WTF x 1
    • Face Palm Face Palm x 1
(You must log in or sign up to post here.)
Page 1 of 2
Thread Status:
Not open for further replies.
Do Not Sell My Personal Information