1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

998 Belt Covers

Discussion in 'Technical Help' started by Wooly46, Feb 3, 2019.

  1. Hi Guys, does anyone know the bolt sizes and lengths for the belt covers on my 998? I’m ordering some Ti replacements, just saves me taking them out and measuring #lazyarse
    Cheers
     
  2. Try looking up Ducati Omaha online parts diagram.
     
    • Like Like x 1
  3. They just say 'Screw' with no sizes - but the diagram looks like they are all the same length so just take one out and you should be fine... maybe :eyes:
     
    • Like Like x 1
    • Agree Agree x 1
  4. Is there 13 in total?
     
  5. Can't tell from the diagram as it isn't detailed enough :)
     
  6. Yes, it's the clutch cover that's a nightmare with different length screws
     
  7. Parts book says 15
     
    • Agree Agree x 1
  8. Yeh, looks like I’m going to have to remove each one and measure them :rolleyes:
     
  9. That's 15 all with the same part number
    If it helps the ones fitted to my 999 are M6x1 20mm long, they are probably the same
     
    • Agree Agree x 1
  10. I’m sure there were 2 different screw lengths... all m6 but maybe x15 and x25mm rings a bell.
     
  11. M6 x 25 shallow caphead comes up in a listing but could be wrong. (77950251A) (15 off as said)
     
Do Not Sell My Personal Information