Titanium inlet valves for a 1999 - 2001 Ducati 996RS, manufactured by Zanzi of Italy and originally supplied through Jim Stock of Slingshot Racing in Preston. The valve diameter is 39mm, overall valve length is 105.75mm, stem diameter is 7mm over 75mm of its length before waisting down (see picture), collet groove starts 3mm from the top of the stem and is 1.6mm wide. Obviously a bit of a niche part but MIGHT be suitable for use in other Ducati heads if an engine builder is looking to release a bit more power from a project bike but that is for any potential buyer to confirm for themselves. £320 per set of 4 including postage to a UK mainland post code*. Happy to discuss discounting the ‘per set’ price if you want more than 2 sets. Andy *Organising delivery outside the UK is a PITA but I am prepared to talk to Parcelforce or DPD about what it costs. I do not accept any responsibility or liability for local import duties, taxes or courier admin costs that might be incurred. Please note, all couriers in the UK limit the amount of compensation in the event of non delivery/damage/loss. Increased insurance cover is available at extra cost but the package value will be reflected on the Customs declaration. Payment must be in UK sterling and the buyer will have to pay any bank or PayPal charges I might incur.
