Hi guys, Anybody already got a 1Jac ore ConStand for the DVT?? I was thinking about it, but not sure if it is as good and easy to use as in the video's. Your comments please
Saw this at bike show but put off because it won't fit to a F650GS which is the wife's bike so a non starter. Looks well put together tho.
I bought one for my VFR1200 (Constand) Stands are well built Very difficult to hold the bike upright and wiggle the the stand in place on the VFR. I succeeded - but was not happy doing it. I then bought the front wheel chock - but unless you bolt that down - it was not sturdy enough to hold the VFR on its own. Trying the combination (Stand and chock (before bolting)) - I nearly dropped the VFR - and got trapped between it and my tool box - luckily - I had phone in my pocket and was able to call for help - luckily - just scratched frame where stand rubbed. With the chock bolted - the issue is getting it out of the chock and back in the chock to take it off the stand. So they work fine - but are tricky to use - suggest you get an assistant to help you. The VFR is 40 or 50KG heavier than the multi. I contacted them 3 or 4 months ago for new adapters for the DVT and Scrambler - they were not available then. So have not tried it on Multi.
