Hi Guys I am selling my SW-Motech Panniers and the Support bracket and bars for 2014-2017 Monster 821 and 1200 on Ebay They work well but i dont need them any more They are clean and in very good condition - maybe used four times? Panniers here http://ebay.us/3ZkXCO?cmpnId=5338273189 Support Bracket and bars here http://ebay.us/PNnRz5?cmpnId=5338273189
These panniers have been on my 'maybe' wish list for a while. Just interested in whether a Hyper mounting bracket would use two of the tail-tidy mounts?? I'd better talk to SW-Motech...
There are threaded holes in the subframe on the monster, behind the mudflap, worth a look on the hyper. If you want better pictures of the braket with a ruler to scale them please sat. Obviously less p&p if they go in one parcel.
Hi Keith The mounting holes in the bracket are 8mm the front pair are 6.2cm centre to centre and the rear are the same. it is 8cm from the front pair to the back pair (see pictures) Hope that is helpful JOn
These bags are the H type with the support pockets low so that they are supported high and clear of the pipes Picture below
