Cleaning Akrapovic Full Titanium System

Discussion in 'Detailing and cleaning' started by Boukekoppejan, Mar 14, 2019.

  1. hi,

    I bought a full titanium akrapovic system and i want clean it not polishing so that i get the nice blue spots back, can somebody advise me how to do that?

    Many thanks!
  2. If you want that blue colour back, it's possible. All you have to do is remove the "oxidation". That's what changes the colour. If you get a heavy duty 3M pad and give it some elbow grease the oxidation will come off. After you're done I would wipe it down with an alcohol/water solution to remove everything. Then just rip it and the pipes will reoxidize blue.
  3. I'll second this.

    go and buy yourself a big plastic storage box thingy from the pound shop and then a tenners worth of harpic nuclear juice and a set of heavy duty rubber gloves and scotch pads

    dismantle exhaust, leave it in the box covered in harpic for a night, scrub clean and marvel at the magic before your eyes.

    then polish up or leave as it is.

    oh and gloves...

    The blueing as dutch says, is just a case of using it. :upyeah:
  4. Thanks! I shall try. I Will post the results