Good condition used 748 and otherstuff

[FONT=&amp]2nd amendment. please pm me as my e-mail has been frozen after trying to send some pictures.
Title should be 748 bits and other stuff. The 748 has already gone.
These are all “good condition” used parts, some of which have been professionally refurbished to a high standard. I think that the asking prices are fair but I am open to reasonable offers. Postage and packing will be at cost unless you collect. There are too many parts to post individual photos but I will e-mail photos if required. PM or e-mail me at [email protected].[/FONT]
· [FONT=&amp]Febur magnesium alloy "Corse" style race swingarm (916/748/996). The swingarm was refurbished by Steve Turner of TCPS in April ’13 which involved a chemical strip and alumina powder blast back to bare metal prior to carrying out dye penetrant crack detection. No cracks were found and it was re-chromated and powder coated in satin black. The swing arm has new bearings fitted and comes with the matched rocker arm and “road” eccentric hub. £1250.00[/FONT]
· [FONT=&amp]Marchesini magnesium alloy 3.5x17 front and 6x17 rear “road and track” wheels. Will fit the 916, 748, 996 and possibly the 998. The wheels were refurbished in the same way and at the same time as the swingarm above and are also finished in satin black. The front wheel has new bearings fitted and includes a pair of used but useable EBC lightweight race discs. The front wheel has some pitting caused by the alumina powder blasting removing a few very small patches of minor surface oxidisation. £850.00[/FONT]
· [FONT=&amp]Ohlins DU9260 rear shock absorber (748RS) fitted with a 160mm free length, 70N/mm (1091-19/70) spring. Unused since bought new, it was serviced by FTR Suspension in April ‘13. £650.00[/FONT]
· [FONT=&amp]Brembo P4 30/34, 2 pad “GP Billet” front brake calliper kit, 40mm mounting. Should fit all Showa forks 1994 to 2001 after which the mounting was changed to 65mm. It should also fit a Super Light. £400.00[/FONT]
· [FONT=&amp]Ducati carbon 748 mono tail section in a “tricolore” style red and white with a green stripe. £250.00[/FONT]
· [FONT=&amp]Brembo billet radial Clutch Master Cylinder Ø16x18, to suit Ducati and Japanese bikes up to 750cc. £200.00[/FONT]
· [FONT=&amp]Brembo cast Front Brake Pump Ø19x20. To suit twin brake disc and requires banjo pressure switch to operate brake light. £100.00[/FONT]
· [FONT=&amp]Febur aluminium alloy billet race footrest kit 748/916 with MAD "Corse" style carbon heel guards. £100.00[/FONT]
· [FONT=&amp]Ducati 916 Race Front Fairing Bracket. £65.00[/FONT]
· [FONT=&amp]Ducati Performance 916/748/996 quick release petrol tank cap (Gunmetal). £50.00[/FONT]
· [FONT=&amp]Carbon chain guard/rear brake pipe guide. Non standard race part. £50.00[/FONT]
· Hyperpro steering damper including fitting kit for 916/748/996. £50.00 SOLD
· [FONT=&amp]Evoluzione aluminium alloy billet pre 2000 (short operating rod) 916/748/996 clutch slave cylinder. £35.00[/FONT]
· [FONT=&amp]Goodridge 748-98/916-97 stainless steel braided twin front brakes lines. £35.00[/FONT]
· Lightweight aluminium alloy race front wheel spindle incl. nut and washer. Should fit all Showa forks, not sure about Ohlins. £35.00 SOLD
·916/748/996 carbon front fairing V piece. £30.00 SOLD
· [FONT=&amp]916/748/996 carbon Swingarm cover. £30.00[/FONT]
· Ergal rear wheel one piece nut. £25 withdrawn
· [FONT=&amp]Renthal rear sprocket 520x41 (358-520-41HA). £15.00[/FONT]
· [FONT=&amp]Fren Tubo anodised (blue) 916 clutch line. £15.00[/FONT]Andy.

 

Very easily, it fits under the upper chain slider and uses the same 3 fixings. My google account has been frozen for 24 hours for "unusual activity" whatever that means. All I was trying to do was send some pictures of the calipers. I've go to go to work now but will try and post a picture later this afternoon. Andy