SS/Superlight/ST3 Clearout

Discussion in 'Parts, Accessories & Clothing For Sale' started by Pablo Pirate, Dec 23, 2013.

  1. Decided to have a clear out as some of these parts are never gonna be used. I'll take some pictures or pm me if your interested (Need to get them down from the loft). And I can sort prices as well.

    Superlight
    LH/RH Yellow full fairings. £105 a side
    LH/RH Yellow half fairings (Including Superlight Decals lacquered in). £115 a side
    Yellow seat (Seat will require recovering as I had it done in suede and looks abit naff). £160 -SOLD
    Yellow head light cowl. £55
    Yellow petrol tank. £175 - SOLD

    SS
    LH/RH seat panels £30 a side
    Rear panel with grab handle. £20
    Seat. £30
    Headlight cowl (Has crack in the panel). £25
    LH/RH Half fairing panels (Complete but require re-painting) £60 the pair + P&P
    Half fairing brace £20 + P&P
    Brake light £12.50 + P&P.
    Indicators £12.50 + P&P.
    Pistons £50 + P&P.
    Barrels £100 + P&P. - SOLD
    Rods.
    Cams.

    ST3
    Various panels/plastics/parts most will require painting.
    Swingarm (steel).

    Cheers for looking and pm me if you require pics (That will allow me prioritise which bits I drag down first)

    Open to offers on all items

    Merry Crimbo Pablo
     
    #1 Pablo Pirate, Dec 23, 2013
    Last edited: Jan 11, 2014
  2. Pm sent
     
    • Like Like x 1
  3. Howdo!!

    I shall reply to everyone's pm as soon as I've cleaned all the parts and took some pictures.

    Cheers Pablo

    Here's the half-fairings.

    photo 1 (5).jpg

    photo 2 (6).jpg
     
  4. Few pictures of the tank, has carbon tank pad. Internal some surface rust where the POR has started to lift. Mark at the front is from the tank catch and is not visible when fitted same at the rear once the seat is on. It is in good condition for 19years old. No pump are ancillaries.

    photo 1 (6).jpg

    photo 2 (8).jpg

    photo 2 (9).jpg

    photo 1 (7).jpg

    photo 3 (4).jpg
     
  5. Seat unit has a couple of marks and hairline cracks round the mounting holes again this is 19years old.

    Thanks for looking (Will take some more pics).

    photo 1 (9).jpg

    photo 4 (5).jpg

    photo 1 (8).jpg

    photo 3 (6).jpg

    photo 3 (7).jpg
     
  6. Paul how much ???? For seat? Then how much for tank n fairing???
     
  7. PM sent
     
  8. Hi Pablo, are your full fairing panels early or later type with air duct to vertical cylinder?
    Ta.
     
  9. The full fairings (1994) are the early version with no cut outs. Pics up this afternoon.
     
  10. if the indicators are fronts I will take them,cheers.
     
  11. LH and RH SS panels good condition - paint worn at the rear but can't be seen due to rear panel. £35 a side. Also have rear panel and handle (Handle does have a chip in the paint), seat and foot pegs - convert your SL to a dual seat LH Superlight Fairing panel minor stone chips, hair line crack in paint right at the bottom (Once on the bike you can only see this if you get on your hands and knees.Will stick up the RH side as soon as I've got it down. £125 a side. Open to offers on all items. Cheers Pablo

    photo 1 (11).jpg

    photo 2 (14).jpg

    photo 3 (9).jpg

    photo 4 (8).jpg
     
  12. pabs, are the ss half fairings red? if so what sort of repaint do they need? cheers chap.
    Also, would you have the mounting furniture for them?

    cheers

    Sev.
     
  13. Paul, thanks for the seat. Great putting a face to the name. Less long John Silver more The Goose :)
     
    • Like Like x 1
  14. Good to meet you Tim good luck with the bike, will have to pop in and have a butchers next time I take the Superlight up for a blast.

    Sev - the other half fairings have been painted black, used these as the templates for the carbon/kevlar set on the Superlight.

    Cheers Pablo
     
  15. sweet, have you got the moulds that were taken off them?
     
  16. I could still be interested Pabs, I've wanted to make a carbon pack for the SS for years, but its been the components to lift he moulds off that have held me back in that respect.

    Proper moulds, pre-preg carbon, none of this wet lay cobblers. I may still resurrect the idea :upyeah:
     
  17. The problem with oronero is they no longer make any 900 parts moulds are now owned by mdina italia guess how I found out ;(.
     
  18. have you been in contact with Mdina Italia about the parts?

    If they can't be arsed to make anything, fuck it i'll buy the moulds if they're any good.
     
  19. They have 1 carbon seat in stock I noticed that it mentioned oronero, so thought feck ya you had my pants down. Went direct to be told that mdina are the rights owner/retailer for oronero carbon stuff n will take orders etc unless stock items which is 1 seat.
     
Do Not Sell My Personal Information