Hi guys, Want to change the linkage arm to an adjustable so I can lower the ride height. Any one done this that could give me a how to support the bike etc when doing this. Or if there’s a post somewhere else I could look at. Cheers Trebor
You can fit one from a 1098, best way is to support the bike by putting axle stands under the foot pegs and letting the swing arm drop , also remove the rear wheel so it gives more room to work with.
It's listed on this thread fella... £93.80 https://www.ducatiforum.co.uk/threads/ducati-performance-848-1098-1198-30-off.54839/
If you have folding pegs, swap them left/right so upside down and axle stands under pegs as they should be fixed now.