Hi there, Thanks a lot for the work you got in this Tools and Topic Sadly I could not get this to work. I have an 1098S with only 1 Key and no keycard. Now I would like to get the bypass code via the Transponder Code from the Zen Bull Mini (ordered but not here yet). After this I want to clone the Key to an new one (ordered a key with a 5M transponder). Now I want to get used to the software/excel. I tried the example from the MK10 Post "06 00 00 00 C0 B5 D0 7D and 03 00 00 00 60 D8 E8 38 to test" but when I got in the key code (06 00 00 00 C0 B5 D0 7D for example) I got no key in Shift 4. I only get this but nothing to put in the "Type Last 5 Digits Below". Could you please help me?
Ohhhh my god, this was to easy for me :-D Thanks for this :-D Hope to get everything will work if the Zen Mini is here. This is a great option to not open the Dash - great work
If you buy a key blank with a T5 transponder it will be blank. You need to program the transponder first. You can use the info above shown in the green boxes at Key code. Then, once you have the bypass code for your current key you can program two keys to the dash. A better way would be to PM me and I will give you a code to use that is not in the public domain.
