Separate names with a comma.
Just a quick update; clutch plates finally arrived and fitted easily enough, then the inevitable clutch drag as the stack depth seemed to be on...
Where's my darn parts!? NZ: Bloody miles from everywhere!!
Yeah Chris was a big help, I got a later 1098 ECU off him with a DP map flashed onto it (it wasn't the actual problem with my bike but seemed to...
Still in progress, I eventually tracked it to a break in the wiring loom one one or more of the three wires that go to the front coil, discovered...
Sorry I should've added that when I stripped back the crappy insulation tape all three wires looked a bit flattened or pinched in places, so I...
Hi Pavey, I thought I'd update you; I was continuity testing my front coil wiring and I think I've found my problem. One of the three wires to...
I tried a second earth from the front coil but it made no difference, I've decided Ducati electrics are beyond me so I'm going to take it to...
Did they tell you what they did? I got another ECU but it wasn't the problem, now think it is a bad earth from the front coil - which is what...
Thanks for the advice, fairly certain mine is the ECU though with all the EOBD errors and having replaced the cheaper bits, coil/plug/relay. Will...
I'm reasonably certain my ECU has coil drive failure after replacing coil/plug and still getting the same 10.2 error, so I'm going to go the...
Ouch, I think I will consult eBay!
Took it for a test ride today, same thing again ok up to 9500rpm then the EOBD light comes on, drop the revs and it goes off. After it's started...
Did you ever get this resolved Pavey, Was it the ECU in the end as my bike is giving the exact same symptoms; 10.2 error, new coil and plug makes...
Well I replaced the relay and the front spark plug for good measure then took it for a run, it was ok at low revs in town, until I got it on the...
Thanks Chris I will try that as the next step. I've already moved mine round to the front of the battery box in case I needed to get at it!
