Separate names with a comma.
All sorted, stripped the starter on the bench cleaned it down and replaced the brushes (very fiddly, but worth it to save money on new motor)....
where could I get the gasket from?
Does anyone have a suggestion on what type of liquid gasket seal to use when re-fitting the alternator case?
Took the motor apart to test it on the bench turned over, but extremely weak. Took apart and cleaned and the brushes are worn down to there...
I have a spare battery which I connected straight to the starter motor and it didnt turn, I will have it stripped down today so I can have a...
yes I have checked that and the solenoid seems to be working all ok
Does anyone have a guide to removing the starter motor?
Changed the battery, still the same... gutted
I'm gonna get new battery tomorrow spoke to mechanic at corner speed and he said regardless of volts, it needs amps to turn over
I've bridged solenoid no sparks and motor didnt turn
I have tested the battery and getting 12.8v
Thanks I have cleaned solenoid and battery terminals, I have 12.4 v down at the starter motor, but still just clicking noise. I will now check...
Went to start the bike up this morning and no luck. Can hear what I think is the fuel pump priming when I lift the side stand. And they press...
Thanks I had about 5 people ring up when it was listed at 4k then I reduced it and it's all gone quiet